Concrete Construction
Fixing Products
- Colour Matched Screw Caps
- Ex Fix High Perform Insulation Fixing
- Ex Fix Technical
- Damproofing and Remedial Fixings
- Scaffolding Accessories
- Insulation Retaining Washers
- Membrane Fixing For Damproofing
- Membrane Plug Technical Data
- Panel Fix Insulation Fixing
- Panel Fix Technical
- Plaspin Plastic Insulation Hanger
- Plaspin Technical
- Support Washer
- Trim Fixings For Insulation
Wall Tie Accessories
Damproofing & Remedial
Scaffolding Accessories
Heavy Duty Plastic Shim
Plastic Packers
Ex Fix Technical Data
 |
 |
| Fixing Body Material: Polypropylene |
Expansion Pin Material: Glass Filled Nylon |
| Fixinng Length | Head Diameter | Insulatiuon Thickness | Minimum Embedment Depth | Drill Diameter |
|---|---|---|---|---|
| 60mm | 50mm | 0 to 30mm | 30mm | 10mm |
| 90mm | 50mm | 30 to 60mm | 30mm | 10mm |
| 110mm | 50mm | 60 to 80mm | 30mm | 10mm |
| 130mm | 50mm | 80 to 100mm | 30mm | 10mm |
Pull Out Performance for various base materials
| Concrete | Brick | Block | Hollow Block |
|---|---|---|---|
| 0.80Kn | 0.75Kn | 0.70Kn | 0.45Kn |
Shear Loading
Maximum recommended shear load per fixing is 0.15KnApplication Temperature in the range -30C to +90C
ALL MATERIALS USED FOR THE FIXING BODY AND EXPANSION PIN ARE FULLY RESISTANT TO CORROSION.
